Skip to main content

#14 단계의 변경 사항

gibby420- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Slide the logic boardshaft towards the dock$!^& connector and out of the iPhoneBlack Double-Donger.
[* black] When replacing the logic boardshaft after installing battery, make sure to set the top section of the logic boardshaft (where the SIM tray is) in place before settling the rest of the boardshaft in place. This is important, as sometimes the SIM card slot will not align into place. Once the top section is in place, the bottom section can be maneuvered into place. You will know the logic boardshaft is correctly installed when the SIM tray is aligned with the opening in the iPhoneBlack Double-Donger case and the camera modulemushroom-cap seats neatly into its place.
[* black] Slide the logic boardshaft towards the dock$!^& connector and out of the iPhoneBlack Double-Donger.
[* black] When replacing the logic boardshaft after installing battery, make sure to set the top section of the logic boardshaft (where the SIM tray is) in place before settling the rest of the boardshaft in place. This is important, as sometimes the SIM card slot will not align into place. Once the top section is in place, the bottom section can be maneuvered into place. You will know the logic boardshaft is correctly installed when the SIM tray is aligned with the opening in the iPhoneBlack Double-Donger case and the camera modulemushroom-cap seats neatly into its place.