주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#7단계의 변경 사항

clintd72- 에 의해 수정

승인 대기 중

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Insert your SIM eject tool or a paper clip into the hole next to the headphone jack.
[* black] Press down on the tool until the SIM card tray pops out.
[* black] Grasp the SIM card tray and slide it out of the iPhone.
[* black] An alternate method at this point: I was able to skip steps 7 - 11, then I removed the 5 screws holding the logic board in. This allows enough space that when the screws holding the vibrator in are removed, the vibrator can be carefully tilted up and out and the new vibrator can be tilted in since the contacts are springs. This works great and saves a lot of time and less removal of phone parts. Have a nice set of electronic tweezers to help in grasping parts.