Skip to main content

#2 단계의 변경 사항

chrisrcarlson- 에 의해 수정

편집 거부됨 에 의해 Jake Devincenzi

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* icon_caution] Be careful when using a heat gun in the forthcoming steps. Use it at a very low heat setting, and make sure not to melt the touch screen plastics or Home button. The metal frame tends to conduct heat very well so try to avoid touching these hot areas.
[* black] If the glass has shattered at the top or bottom be especially patient and gentle when removing fragments. In extreme cases you may have to pick off any glass shards that remain glued to the plastics.
[* black] Using a heat gun or hairdryer, heat the top left area of the touch screen.
[* black] Use your fingernails to slowly lift up the left corner. The touch screen plastics are held to the touch screen with adhesive. It may take some work to free the corners. The gasket may obscure the glass edge from the plastic frame. A razor blade may come in handy to expose the seam.
[* black] Use your fingernails to slowly lift up the left corner. The touch screen plastics are held to the touch screen with adhesive. It may take some work to free the corners. The gasket may obscure the glass edge from the plastic frame. A razor blade may come in handy to expose the seam.
[* icon_caution] If it seems like too much force is being applied to lift the touch screen plastics, try using the heat gun again.
[* black] Heat and repeat for the right side.