주요 콘텐츠로 건너뛰기

이 단계의 변경 사항

Taylor Arnicar- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Place [product|IF137-006|custom fit adhesive strips] or double stick tape on the open areas of the touch screen plastics. After attaching tapeIf you used double stick tape, make sure to plastics peel double stick tapeoff its outside layer before attaching the glass.
[* black] Place [product|IF137-006|custom fit adhesive strips] or double stick tape on the open areas of the touch screen plastics. After attaching tapeIf you used double stick tape, make sure to plastics peel double stick tapeoff its outside layer before attaching the glass.
[* icon_caution] When reattaching the plastics to the glass, make sure the "#2" cable is routed as shown in the second picture.
[* black] Reattach the plastic frame to the glass. Pinch each corner for 60 seconds to allow the tape time to bond the two surfaces.