Skip to main content

#6 단계의 변경 사항

Walter Galan- 에 의해 수정

편집 승인됨 에 의해 Walter Galan

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Place [product|IF137-006|custom fit adhesive strips] or double stick tape on the upper area of the digitizerfront panel plastics.
[* black] Place [product|IF137-006|custom fit adhesive strips] or double stick tape on the upper area of the digitizerfront panel plastics.
[* black] Use the flat end of a spudger to press the adhesive strips to the plastic frame.
[* icon_note] This will clear out bubbles and ensure good adhesion.