#2단계의 변경 사항
johann beda- 에 의해 수정
편집 거부됨 완료자 Andrew Optimus Goldheart
- 이전
- 이후
- 변경 사항이 없습니다
단계 라인
| [title] Disconnect the optical drive thermal sensor connector |
| [* red] Pull the optical drive thermal sensor connector straight up from its socket on the logic board. Pull parallel to the board. |
| [* icon_note] If you are removing the optical drive just to get access to the fan, disconnecting the optical drive thermal sensor connector is not neccessary, as there is enough slack to remove the fan with the optical drive cables still connected. |