메인 콘텐츠로 스킵하기

#4 단계의 변경 사항

Walter Galan- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* icon_note] There are five retaining clips on each side of the iPod. The largeAn iPod opening tool will be used to separate the plastic front from the metal back of the iPod.
[* black] Insert the large iPod opening tool into the left side of the iPod, with the edge of the tool pointing towards the metal back.
[* black] Gently enlarge the existing crevice by wiggling the large iPod opening tool and moving it to the left.
[* icon_note] There are five retaining clips on each side of the iPod. The largeAn iPod opening tool will be used to separate the plastic front from the metal back of the iPod.
[* black] Insert the large iPod opening tool into the left side of the iPod, with the edge of the tool pointing towards the metal back.
[* black] Gently enlarge the existing crevice by wiggling the large iPod opening tool and moving it to the left.
[* black] Continue doing so until the entire side of the iPod is loose.
[* black] You can then insert the smallan iPod opening tool near the Hold button. Be very careful while inserting the tool, as the display is very fragile.
[* black] You can then insert the smallan iPod opening tool near the Hold button. Be very careful while inserting the tool, as the display is very fragile.