메인 콘텐츠로 스킵하기

#4 단계의 변경 사항

taras- 에 의해 수정

편집 승인됨 에 의해 Jake Devincenzi

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* icon_note] There are fivefour retaining clips on each side of the iPod. An iPod opening tool will be used to separate the plastic front from the metal back of the iPod.
[* icon_note] There are fivefour retaining clips on each side of the iPod. An iPod opening tool will be used to separate the plastic front from the metal back of the iPod.
[* black] Insert the iPod opening tool into the left side of the iPod, with the edge of the tool pointing towards the metal back.
[* black] Gently enlarge the existing crevice by wiggling the iPod opening tool and moving it to the left.
[* black] Continue doing so until the entire side of the iPod is loose.
[* black] You can then insert an iPod opening tool nearto the right of the Hold button. Be very careful while inserting the tool, as the display is very fragile.
[* black] You can then insert an iPod opening tool nearto the right of the Hold button. Be very careful while inserting the tool, as the display is very fragile.