메인 콘텐츠로 스킵하기

#7 단계의 변경 사항

dipalma- 에 의해 수정

편집 거부됨 에 의해 David Hodson

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] You should now have one orange ribbon cable still attaching the front case to the back.
[* icon_note] At this point you are able to remove and replace the blue rubber bumpers, or continue with separating the case.
[* black] NOTE:The replacement battery has only ONE lead, so I don't know why the original author added the following steps. At this point in the procedure, I pried the old battery, with it's one lead, and then inserted the new battery in place. The one lead on the battery was then connected back to the location the old lead was removed from in Step 6.
[* black] I found no need to continue with the following steps. I inserted the lead back into the location noted in Step 6 and reassembled the case. It worked great after this