#1단계의 변경 사항
편집자 Isaiah Schultz-
편집 승인됨 완료자 Isaiah Schultz
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Carefully insert |
|---|---|
| + | [* black] Carefully insert a single flat nylon spudger underneath the battery. |
| [* black] Apply enough pressure to release the battery from the adhesive holding it to the phone. | |
| - | [* icon_note] We removed the motherboard completely before attempting to remove the battery due to the adhesive on our device being too strong and we did not want to damage the motherboard. |
| + | [* icon_note] We removed the motherboard completely before attempting to remove the battery due to the adhesive on our device being too strong and we did not want to damage the motherboard. You instead need to use an iOpener kit to heat the phone so the adhesive will loosen. |