Skip to main content

#6 단계의 변경 사항

Andrew Bookholt- 에 의해 수정

승인 대기 중

삭제되었습니다
추가되었습니다
변경 사항 없음

스텝 라인

[* black] Insert a 1.4 mm Y0 Tri-wing screw into each of the outer holes drilled into the trackpad (two screws total).
[* icon_caution] You'll install the rest in a bit.
[* icon_note] When you tightenTighten the two screws, make them tight andscrews all the way, then back them out about a quarter turn to aid in aligning your trackpad during the next few steps.
[* icon_note] When you tightenTighten the two screws, make them tight andscrews all the way, then back them out about a quarter turn to aid in aligning your trackpad during the next few steps.