Skip to main content

#5 단계의 변경 사항

Nick- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] The lower case. Apple's using wide, thin black rubber feet on the Unibody Pros, a departure from the small stubby bumpers on the Aluminum revisions.Just keep in mind it is held on with 3M double sided tape which is strong, but if you are not careful, they can come off pretty easy
[* black] The lower case. Apple's using wide, thin black rubber feet on the Unibody Pros, a departure from the small stubby bumpers on the Aluminum revisions.Just keep in mind it is held on with 3M double sided tape which is strong, but if you are not careful, they can come off pretty easy
[* black] There are ten Phillips screws around the perimeter of the lower case to remove:
[* red] Seven 3 mm screws
[* orange] Three 14 mm screws
[* icon_note] Apple's user manual for this computer has instructions to remove the lower case. But they got the length of one of the screws wrong. We promise to get them right in our repair guide.
[* black] The computer's serial number is engraved in the aluminum lower case, not the upper case like the other Unibody machines.