주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#36단계의 변경 사항

Jake Devincenzi- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Insert wisdom hereUse cutting pliers to cut one of the surface-mounted lead down to a length where you can bend it through the nearest hole in the battery contact with about 6 or 7 mm left over.
[* black] After bending the lead through the hole, use the same through-hole soldering technique as earlier to solder the battery lead to the hole in the battery contact
.
[* black] Insert wisdom hereUse cutting pliers to cut one of the surface-mounted lead down to a length where you can bend it through the nearest hole in the battery contact with about 6 or 7 mm left over.
[* black] After bending the lead through the hole, use the same through-hole soldering technique as earlier to solder the battery lead to the hole in the battery contact
.