주요 콘텐츠로 건너뛰기

#7 단계의 변경 사항

Eric Essen- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[title] Installing the Transmission Drain Plug
[* black] Re-insert the transmission drain plug into the transmission housing and hand tighten.
[* black] Using a 3/4" wrench, tighten down the transmission drain plug.
[* icon_note] It is important to not over-tighten the drain plug. Tightening the plug too much can cause the threads on the aluminum housing to strip. The plug should be tight, but not too tight. The correct torque specification is 14-21 Foot-lbs
[* icon_note] It is important to not over-tighten the drain plug. Tightening the plug too much can cause the threads on the aluminum housing to strip. The plug should be tight, but not too tight. The correct torque specification is 14-21 Foot-lbs