주요 콘텐츠로 건너뛰기

#9 단계의 변경 사항

Brett Hartt- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Insert wisdom hereBefore re-installing the primary chain inspection cover, make sure the rubber O-ring on the inside of the primary chain inspection hole is clean and properly seated.
[* black] Also make sure that the rubber o-ring is clean and in proper condition before replacing the screws in the primary chain inspection cover.
[* black] Using a ''' T100 ''' Torx screw head, re-install the primary chain inspection cover
.
[* black] Insert wisdom hereBefore re-installing the primary chain inspection cover, make sure the rubber O-ring on the inside of the primary chain inspection hole is clean and properly seated.
[* black] Also make sure that the rubber o-ring is clean and in proper condition before replacing the screws in the primary chain inspection cover.
[* black] Using a ''' T100 ''' Torx screw head, re-install the primary chain inspection cover
.