주요 콘텐츠로 건너뛰기

#10 단계의 변경 사항

Eric Essen- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Using a T27 Screwdriver head, reinstall the clutch inspection cover. Install the screws in the following order:
[* red] Top
[* orange] Bottom
[* yellow] Left
[* green] Right
[* icon_note] Once all of the screws have been lightly hand-tightened, use a torque wrench to tighten them to their proper specification of '84-10884-108 Inch-Pounds. Tighten the screws in the same order as before.
[* icon_note] Once all of the screws have been lightly hand-tightened, use a torque wrench to tighten them to their proper specification of '84-10884-108 Inch-Pounds. Tighten the screws in the same order as before.