주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#6단계의 변경 사항

Brian Tsai- 에 의해 수정

편집 거부됨 완료자 Evan Noronha

이전
이후
변경 사항이 없습니다

단계 라인

[* red] Disconnect the LCD thermal sensor cable connector from its socket on the logic board.
[* icon_caution] This connector is very difficult to disconnect, and the wires may may strip out of the connector while trying. You may wish to not disconnect this and instead have a helper swivel the screen out of the way while you remove the hard drive. There is enough flex in the cable to allow this, if you disconnect the other 3 cables.
[* icon_note] If your fan is spinning full speed after completion, check this connection or the hard drive's thermal sensor cable.