주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#4단계의 변경 사항

Matthew Elvey- 에 의해 수정

편집 거부됨 완료자 Geoff Wacker

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Rotate the display out of the outer case enough to disconnect the LED backlight power cable from the LED driver board.
[* green] New suggestion: If just replacing the hard drive, you may be able to skip this step and the next two steps if you just move and rotate the display enough to access the two screws holding in the hard drive - on some machines, at least, the cables are long enough that only the first of the 4 cables needs to be detached.
[* icon_note] Disconnect the LED backlight power cable by depressing the locking mechanism while pulling the connector away from its socket (toward the bottom edge of the iMac).