BCG800XL Grinder Jamming due to Worn Impeller 단계 #3 기록

#3단계의 변경 사항

편집자 Ben Gottemoller- 2017년 3월 25일

편집 승인됨 완료자 Ben Gottemoller

	[title] Tools you'll need
-	[* black] You'll need a 10mm socket and long (12 inches or more) phillips #2 screwdriver.
+	[* black] You'll need a 10mm socket with ratchet (or a 10mm wrench).
+	[* black] A #2 Phillips screwdriver, 12 inches or longer, preferrably with magnetic tip (TIP: You can rub a magnet against it to magnetize it if it's not already).
	[* black] Sandpaper and a file are likely optional. They are only necessary if the 3D printed impeller isn't a perfect fit.
	[* black] FOR SAFETY THE GRINDER MUST BE UNPLUGGED DURING DISASSEMBLY AND REASSEMBLY! THERE ARE HIGH VOLTAGE CONTACTS INSIDE THAT ARE DANGEROUS AND EASY TO ACCIDENTALLY TOUCH WHEN THE UNIT IS PLUGGED IN! Please unplug your coffee grinder before continuing!