BCG800XL Grinder Jamming due to Worn Impeller 단계 #9 기록

#9단계의 변경 사항

편집자 Ben Gottemoller- 2016년 6월 8일

편집 승인됨 완료자 Ben Gottemoller

	[title] Worn impeller removal
	[* black] Lift out the old impeller. If you judged rightly, it should be worn in the way illustrated by the picture.
-	[* black] Make sure the washer underneath the impeller doesn't fall out.
-	[* black] Optional Modding Tip: You can make that washer a little thicker (like 0.1 to 0.2 mm more) if you'd like your grinder to go finer.
+	[* black] Make sure the steel washer underneath the impeller doesn't fall out.
+	[* black] There's also a fibrous washer under the impeller. I chose to throw this away since it was falling apart and does not appear necessary (My grinder works fine without it).
+	[* black] Optional Modding Tip: You can make that steel washer a little thicker (like 0.1 to 0.2 mm more) if you'd like your grinder to go finer.