물건을 수리하세요 커뮤니티 상점

#9단계의 변경 사항

편집자 Ben Gottemoller-

편집 승인됨 완료자 Ben Gottemoller

이전
이후
변경 사항 없음

단계 라인

[title] Worn impeller removal
[* black] Lift out the old impeller. If you judged rightly, it should be worn in the way illustrated by the picture.
[* black] Make sure the steel washer underneath the impeller doesn't fall out.
-[* black] There's also a fibrous washer under the impeller. I chose to throw this away since it was falling apart and does not appear necessary (My grinder works fine without it).
+[* black] There's a fibrous felt washer under the impeller that I recommend discarding. This is no longer needed as the new impeller design hugs the bushing pedestal more closely and does a good enough job keeping grounds away from the bushing anyway.
[* black] Optional Modding Tip: You can make that steel washer a little thicker (like 0.1 to 0.2 mm more) if you'd like your grinder to go finer.