Skip to main content

#9 단계의 변경 사항

Suzanne Bardasz- 에 의해 수정

편집 승인됨 에 의해 Jeff Suovanen

변경 사항 없음

스텝 라인

[* black] Carefully separate the face of the phone from the LCD screen by using a spudger or a pry pick.
[* black] Replace the broken LCD or digitizer and reassemble in reverse.
[* black] Included is a picture of the disassembled HTC Droid Eris. As you can see, there are not many parts involved with the phone.
[* black] If replacing the digitizer, you may either replace the entire front as part of an assembly or use a heat gun to separate and replace the glass only.