Skip to main content

#1 단계의 변경 사항

Minh- 에 의해 수정

편집 거부됨 에 의해 Andrew Optimus Goldheart

삭제되었습니다
추가되었습니다
변경 사항 없음

스텝 라인

[* icon_note] Before proceeding, power down your machine. Close the display and lay it on a soft surface top-side down.
[* black] Remove the following ten screws:
[* red] Two 9 mm 5-point Pentalobe screws
[* orange] Eight 2.6 mmM2x2mm 5-point Pentalobe screws
[* orange] Eight 2.6 mmM2x2mm 5-point Pentalobe screws
[* black] The special screwdriver needed to remove the eight 5-point Pentalobe screws can be found [product|IF145-090|here].