Skip to main content

#1 단계의 변경 사항

Jeff Suovanen- 에 의해 수정

편집 승인됨 에 의해 Jeff Suovanen

삭제되었습니다
추가되었습니다
변경 사항 없음

스텝 라인

[* icon_note] Before proceeding, power down your machineMacBook. Close the display and lay it on a soft surfacesurface, top-side down.
[* black] RemoveUse a [product|IF145-090|P5 Pentalobe] driver to remove ten screws securing the lower case, of the following ten screwslengths:
[* red] Two 9 mm P5 Pentalobe screws
[* orange] Eight 2.6 mm P5 Pentalobe screws
[* black] The special screwdriver needed to remove the ten 5-point Pentalobe
screws can be found [product|IF145-090|here].
[* icon_note] Before proceeding, power down your machineMacBook. Close the display and lay it on a soft surfacesurface, top-side down.
[* black] RemoveUse a [product|IF145-090|P5 Pentalobe] driver to remove ten screws securing the lower case, of the following ten screwslengths:
[* red] Two 9 mm P5 Pentalobe screws
[* orange] Eight 2.6 mm P5 Pentalobe screws
[* black] The special screwdriver needed to remove the ten 5-point Pentalobe
screws can be found [product|IF145-090|here].