주요 콘텐츠로 건너뛰기

#1단계의 변경 사항

Jeff Suovanen- 에 의해 수정

편집 승인됨 완료자 Jeff Suovanen

이전
이후
변경 사항이 없습니다

단계 라인

-[* black] Press down on the PRAM battery and gently nudge it away from the plastic clips holding it in place.
- [* icon_note] Once the PRAM battery is clear of the two clips it will spring out of its housing.
+[* icon_note] The PRAM battery is secured by a spring contact and two small plastic nubs.
+[* black] Gently push the battery away from the two plastic nubs. (This puts increased pressure on the spring contact at the other end.)
+[* black] Once the battery's edge clears the two nubs, tilt it up out of its socket.