기기를 수리하세요

수리할 권리

상점

#11단계의 변경 사항

David Hodson- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

[* red] Useblack] Remove the backing from the double-sided tape and place the three coarse-threaded T10 Torx screws to attach your hard drive toinside the mounting points oniMac.
[* black] Carefully set the rear case ofdrive into the iMac optical bay as close to the lower left corner as possible.
[* icon_note] Do not to repeatedly stick and un-stick the tape, as the adhesive will become weaker.
[* black] Once you are happy with the hard drive's placement, firmly press down along its edges to ensure full adhesion.
[* red] Useblack] Remove the backing from the double-sided tape and place the three coarse-threaded T10 Torx screws to attach your hard drive toinside the mounting points oniMac.
[* black] Carefully set the rear case ofdrive into the iMac optical bay as close to the lower left corner as possible.
[* icon_note] Do not to repeatedly stick and un-stick the tape, as the adhesive will become weaker.
[* black] Once you are happy with the hard drive's placement, firmly press down along its edges to ensure full adhesion.

이미지 1

이전 버전

새로운 버전

이미지 2

이전 이미지 없음

추가