주요 콘텐츠로 건너뛰기

#12 단계의 변경 사항

Jasper Fleischhauer- 에 의해 수정

편집 승인됨 에 의해 Jasper Fleischhauer

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] At the bottom of the display assembly we find a daughter board with some components.
[* black] First we disconnect the cable coming from the motherboard and pry out the vibrator.
[* black] Next we peel off a small connector plate and disconnect the antenna cablecable.
[* black] Next we peel off a small connector plate and disconnect the antenna cablecable.
[* black] Now we are ready to carefully pry out the daughter board itself which is glued in with some double sided tape.