주요 콘텐츠로 건너뛰기

#13 단계의 변경 사항

Philip Le Riche- 에 의해 수정

편집 승인됨 에 의해 Philip Le Riche

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* yellow] Disengage two connectors on a small circuit board on the bottom of the 2nd hard disk bay and lift the screened cable off the bay.
[* green] Remove 2 6.5mm black screws. (On reassembly it's important to put these screws back in the right holes otherwise the front cover of the laptop won't fit.
[* black] Gently lift the motherboard from the right hand edgeedge, first disengaging the audio sockets and disengage itsvolume control from the lower shell, then the connectors from their openings in the side of the laptop lower shellleft hand side. You can now remove it completely.
[* black] Gently lift the motherboard from the right hand edgeedge, first disengaging the audio sockets and disengage itsvolume control from the lower shell, then the connectors from their openings in the side of the laptop lower shellleft hand side. You can now remove it completely.