주요 콘텐츠로 건너뛰기

#15 단계의 변경 사항

Philip Le Riche- 에 의해 수정

편집 승인됨 에 의해 Philip Le Riche

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[title] Screen - 1and lower shell components
[title] Screen - 1and lower shell components
[* icon_caution] Before attempting to remove the screen or any other components left in the shell, make a careful note of how each cable is routed. Take detailed photos if your is not identical to this one.
[* red] Lift the WiFi antenna leads out of their routing channels.
[* orange] Whilst supporting the screen, remove six 6.5mm screws from the screen hinge and lift off the screen.
[* icon_note] Note that one of the screws on the right hand hinge has an earthing strap under it. On reassembly, take care that this strap isn't caught under the hinge and is secured by the screw when replaced.
[* black] To remove and replace the power connector and lead, remove the right hand speaker, secured by 2 screws at the base of its sound box.