주요 콘텐츠로 건너뛰기

#1단계의 변경 사항

Jake Devincenzi- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Place a jack underneath the frame near the passenger side front wheel.
[* black] Raise the car with the jack until you can work comfortably under the car.
[* black] Place a jack stand on the frame immediately behind the jack.
[* black] Slowly lower the jack until the car is resting on the jack stand and remove the jack.
-[* icon_note] Most hydraulic jacks are lowered by place the end of the handle over a knob and turning it counterclockwise. Consult your owner's manual if you don't know how to lower your jack.
+[* icon_note] Most hydraulic jacks are lowered by placing the end of the handle over a knob and turning it counterclockwise. Consult your owner's manual if you don't know how to lower your jack.
[* icon_caution] ***Never*** work underneath a car that is only supported by a jack. It may slip or fail, resulting in serious injury or death.