주요 콘텐츠로 건너뛰기

#5 단계의 변경 사항

oldturkey03- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Now it gets a little tricky. Tilt the gray metal box from the left to the right. Do not try to pull it off.
[* black] Once you tilt isit, you will see a wiring harness that is connected to the box via some hookstabs. Pull those gently apart, remove the shielded cable.
[* black] Now it gets a little tricky. Tilt the gray metal box from the left to the right. Do not try to pull it off.
[* black] Once you tilt isit, you will see a wiring harness that is connected to the box via some hookstabs. Pull those gently apart, remove the shielded cable.
[* black] The harness is terminated via a connector to the side. Unplug the connector by GENTLY pulling on the side of the plastic. Do not pull on the wires.