주요 콘텐츠로 건너뛰기

#8 단계의 변경 사항

oldturkey03- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] withOnce all wiring harnesses are remove, and the green ground cable is off the chassis, you can now remove the powerboard. It is held in place with four small screws, one on each corner.
[* black] YouThe power board should now be looking atdisconnected from the power board of your monitor. On the side furthest ways from the switch, you will seeis a transformer. Next to it, there isare a total of 7 condensers and 3 heatsinks. It is those condensers that are failing due to heat.
[* black] withOnce all wiring harnesses are remove, and the green ground cable is off the chassis, you can now remove the powerboard. It is held in place with four small screws, one on each corner.
[* black] YouThe power board should now be looking atdisconnected from the power board of your monitor. On the side furthest ways from the switch, you will seeis a transformer. Next to it, there isare a total of 7 condensers and 3 heatsinks. It is those condensers that are failing due to heat.