주요 콘텐츠로 건너뛰기

#11 단계의 변경 사항

oldturkey03- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Solder all the capacitors in their respective places. On the logic board, where the capacitors a re located, is an outline of a circle with one part of the circle being heavier. It corresponds with the negative lead of the condenser.
[* black] There is a heavy stripe on the condenser, pointing to the negative lead. Polarity will be maintained by matching those.
[* black] Once all the capacitors are replaced, double check the board to make sure everything is properly mounted.
[* black] Now reassemble the Olevia followfollowing the instructions in reverse order.
[* black] Now reassemble the Olevia followfollowing the instructions in reverse order.