주요 콘텐츠로 건너뛰기

#1 단계의 변경 사항

Alistair Bell- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* red] Remove the two Phillips screws in the battery compartment near the latch.
[* black] Remove the following 6 screws:
[* red] Two 10 mm T6 Torx
Be aware that these screws on either side oflook very similar to the RAM slot.
[* orange] Four 14.5 mm Phillips
ten case screws along the hingeyou are about to remove but are actually shorter, so keep them separate.
[* red] Remove the two Phillips screws in the battery compartment near the latch.
[* black] Remove the following 6 screws:
[* red] Two 10 mm T6 Torx
Be aware that these screws on either side oflook very similar to the RAM slot.
[* orange] Four 14.5 mm Phillips
ten case screws along the hingeyou are about to remove but are actually shorter, so keep them separate.

이미지 2

삭제되었습니다