주요 콘텐츠로 건너뛰기

#1단계의 변경 사항

Miroslav Djuric- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

-[* black] Use a spudger to disconnect the isight cable from the logic board by sliding the cable to the left and out of its connector.
-[* black] Disconnect the left fan and left ambient light sensor cables by placing a spudger beneath each cable and lifting up.
-[* black] Peel up the left ambient light sensor cable from above the left fan, removing tape as necessary.
+[* black] Use a spudger to disconnect the iSight cable from the logic board by sliding the cable to the left and out of its connector.

이미지 2

삭제됨

이미지 3

삭제됨