주요 콘텐츠로 건너뛰기

#3단계의 변경 사항

Evan Noronha- 에 의해 수정

편집 승인됨 완료자 Evan Noronha

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* icon_note] '''If this is your first time removing an iPhone battery adhesive strip, refer to the video in the following step before beginning.'''
[* icon_caution] Try to keep the strips flat and unwrinkled during this procedure; wrinkled strips will stick together and break instead of pulling out cleanly.
[* black] Slowly pull one battery adhesive tab away from the battery, toward the bottom of the iPhone.
[* icon_caution] To avoid tearing the adhesive strip, be careful not to snag it against the battery or lower components.
[* black] Pull steadily, maintaining constant tension on the strip until it slips out from between the battery and the rear case. For best results, pull the strip at a 60º angle or less.
[* icon_note] The strip will stretch to many times its original length. Continue pulling and re-grab the strip near the battery if necessary.