주요 콘텐츠로 건너뛰기

#5단계의 변경 사항

Evan Noronha- 에 의해 수정

편집 승인됨 완료자 Evan Noronha

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* icon_note] If you successfully removed all three adhesive strips, move on to the next step. Otherwise, you will need to pry the battery from the rear case.
[* black] [guide|25705|Prepare an iOpener|new_window=true] and apply it to the back of the rear case, directly over the battery. Alternatively, you can apply heat using a heat gun or hair dryer.
[* black] After about a minute, flip the phone over and use a plastic card to break up any remaining adhesive behind the battery.
[* icon_caution] Do not insert the card from the right, as prying against the logic board can damage it. Also, be sure to not bend the battery, as doing so can puncture the cell and release dangerous chemicals.