주요 콘텐츠로 건너뛰기

#8 단계의 변경 사항

Tobias Isakeit- 에 의해 수정

편집 승인됨 에 의해 Tobias Isakeit

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[title] rear wheel
[* black] The brake on the rear brakewheel is a rather uncommonly used but standard coaster brake.
[* icon_note] This makes us a little curious since the wheel easily skids when the lever is pulled too hard. Also therehard which is not enough heat dissipationmore likely when using a hand lever instead of a back pedal brake. Also coaster brakes tend to get hot when used on long descents. InBut seen in the long runterm it is nearly maintenance-free and only needs some lubrication from time to time.
[* black] The brake on the rear brakewheel is a rather uncommonly used but standard coaster brake.
[* icon_note] This makes us a little curious since the wheel easily skids when the lever is pulled too hard. Also therehard which is not enough heat dissipationmore likely when using a hand lever instead of a back pedal brake. Also coaster brakes tend to get hot when used on long descents. InBut seen in the long runterm it is nearly maintenance-free and only needs some lubrication from time to time.
[* black] The guide arm of the bowden wire has no gap and the wire is riveted at the end. Which means we can not thread it out and leave it attached to the brake.
[* black] So we loosen the guide arm that holds the brake to the frame and lift out the 16" wheel with its 28 spokes, the roller brake and the 3-gear hub.