주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#23단계의 변경 사항

Tobias Isakeit- 에 의해 수정

편집 승인됨 완료자 Tobias Isakeit

삭제됨
추가
변경 사항이 없습니다

단계 라인

[title] controller
[* black] Happy to find regularsome Phillips screws on the front and the backfor a change we unscrew them to finally take a peek inside. Thebehind the rear lid with the cable comes loose easily butcable. But the other side thoughwith the connector pins is a little bit tougher.
[* black] Happy to find regularsome Phillips screws on the front and the backfor a change we unscrew them to finally take a peek inside. Thebehind the rear lid with the cable comes loose easily butcable. But the other side thoughwith the connector pins is a little bit tougher.
[* black] So we bring out our prying combo [product|IF145-259|Jimmy|new_window=true] and the Plastic Opening Tools and try to negotiate–without any success. Even with the help of the iOpener the lid won't come off.
[* black] We leave the lidit where it is and concentrate our efforts on the side of the controller unit to finally get a foot in the door. And what we found inside was a real surprise (people always fall for this, right?)
[* black] All the three boards–held togetherboards–bridged by an army of pins–where drowned in a big gob of yellowish transparent rubber.
[* black] We leave the lidit where it is and concentrate our efforts on the side of the controller unit to finally get a foot in the door. And what we found inside was a real surprise (people always fall for this, right?)
[* black] All the three boards–held togetherboards–bridged by an army of pins–where drowned in a big gob of yellowish transparent rubber.
[* icon_note] We suppose this is to dampen vibration and help dissipating the heat to the outside aluminum casing.