주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#12단계의 변경 사항

Tobias Isakeit- 에 의해 수정

편집 승인됨 완료자 Tobias Isakeit

삭제됨
추가
변경 사항이 없습니다

단계 라인

[title] hub gear motor
[* black] We take offWith the rear cover oflid unscrewed we can push out the motor where the cable is threaded through tosource of rotary motion and discover a small circular boardboard behind the rear cover of the motor.
[* black] We take offWith the rear cover oflid unscrewed we can push out the motor where the cable is threaded through tosource of rotary motion and discover a small circular boardboard behind the rear cover of the motor.
[* red] Besides distributing power it also has three sensors (every fourth coil) for measuring the speed.
[* black] The three gears on the flip side are made of plastic to keep abrasion to a minimum.
[* black] 12 coils on the outer ring make the 10 magnets on the center spindle go round and round–260 times per minute.
[* black] The three gears on the flip side are made of plastic to keep abrasion to a minimum.
[* icon_note] The motor has a continuous output power of 180W and 7.3 Nm of torque.

이미지 1

이전 버전

새로운 버전

이미지 2

이전 버전

새로운 버전

이미지 3

이전 버전

새로운 버전