주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#16단계의 변경 사항

Sam Goldheart- 에 의해 수정

편집 승인됨 완료자 Sam Goldheart

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] BehindWe begin to pry out the rear light with its ultra shortlight, a cable we spotkeeps it in place, but it does give us access to some screws leadinghidden screws. This in turn grants us access to the next compartment with a bunch of more cablesinternals.
[* black] The 5-pin connector is where it all begins. In two separate harnesses (two and three wires) itThis massive umbilical leads from the charging port to the batteries and the BMS (Battery Management System) inat the backother end, and an LED board behind the rear light.
[* black] TheWe peel out said circuit board receives its signals and power over a 10 pin connector and is responsible fordiscover some secrets. This guy controls the rear light and theLED array, as well as some status indication LEDs onalong the toptop of the tube (probably to indicate battery activity).
[* black] BehindWe begin to pry out the rear light with its ultra shortlight, a cable we spotkeeps it in place, but it does give us access to some screws leadinghidden screws. This in turn grants us access to the next compartment with a bunch of more cablesinternals.
[* black] The 5-pin connector is where it all begins. In two separate harnesses (two and three wires) itThis massive umbilical leads from the charging port to the batteries and the BMS (Battery Management System) inat the backother end, and an LED board behind the rear light.
[* black] TheWe peel out said circuit board receives its signals and power over a 10 pin connector and is responsible fordiscover some secrets. This guy controls the rear light and theLED array, as well as some status indication LEDs onalong the toptop of the tube (probably to indicate battery activity).