주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#3단계의 변경 사항

davidroady- 에 의해 수정

편집 거부됨 완료자 Jake Devincenzi

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Disconnect the eight indicated connectors by placing a spudger beneath each one on the cable side and lifting up. Be sure to pry up from the side with the wires, just under where they connect! Any other point will break the connector off the board.
[* black] Disconnect the eight indicated connectors by placing a spudger beneath each one on the cable side and lifting up. Be sure to pry up from the side with the wires, just under where they connect! Any other point will break the connector off the board.
[* icon_caution] Use care when disconnecting some of the smaller connectors. A forceful prod with the spudger may accidentally break them off the logic board.