주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#10단계의 변경 사항

Andrew Optimus Goldheart- 에 의해 수정

편집 승인됨 완료자 Andrew Optimus Goldheart

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Lift up the left side of the logic board and disconnect the gray and black power cable from the bottom of the board.
[* icon_note] Pull the power cable connector parallel to the face of the logic board.
[* black] Grasp the logic board at the left side and at the thin section, and rotate the logic board out of the lower case.
[* icon_note] To properly reassemble your MacBook Pro, you'll have to clean off and replace the old thermal compound from the chips on the back of the logic board. Use our [guide|744|Applying Thermal Paste Guide] to prepare the processor and heat sink surfaces.