#8 단계의 변경 사항

Mike Matthias- 에 의해 수정

편집 승인됨 에 의해 Jeff Suovanen

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Remove the following 15 screws:
[* red] One 4.4 mm black Phillips screw to the right of the ram slot.
[* orange] Eight 4.7 mm silver T6 Torx screws securing the logic board to the lower case.
[* yellow] One 6.2 mm black T6 Torx screw on the right side of the left fan.
[* green] Five 9.4 mm silver T6 Torx screws securing the left and right fans.
[* blackicon_note] If you leave the upper 5 orange screws on, the heatsink/pipes come out effortlessly, still mounted onto the main board. That way its thermal connection is retained.
[* blackicon_note] If you leave the upper 5 orange screws on, the heatsink/pipes come out effortlessly, still mounted onto the main board. That way its thermal connection is retained.