주요 콘텐츠로 건너뛰기

#1 단계의 변경 사항

Adam O'Camb- 에 의해 수정

편집 승인됨 에 의해 Adam O'Camb

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Release the tabs on each side of the RAM chip at the same time. These tabs lock the chip in place and releasing them will cause the chip to "pop" up.
[* black] Pull the chip directly out from its connector.
[* icon_note] If there are two RAM chips installed, repeat the above procedure for the second chip.
[* icon_cautionicon_reminder] When reinstalling the logic board, be sure to cleancompletely [guide|744|clean off the old thermal paste fully and apply a new layer oflayer|new_window=true] on the three chips (CPU, GPU & PCH). We have a [guide|744|guide] that goes offer how.
[* icon_cautionicon_reminder] When reinstalling the logic board, be sure to cleancompletely [guide|744|clean off the old thermal paste fully and apply a new layer oflayer|new_window=true] on the three chips (CPU, GPU & PCH). We have a [guide|744|guide] that goes offer how.