주요 콘텐츠로 건너뛰기

#1 단계의 변경 사항

Andrew Bookholt- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Release the tabs on each side of the RAM chip at the same time. These tabs lock the chip in place and releasing them will cause the chip to "pop" up.
[* black] Pull the chip directly out from its connector.
[* icon_note] If there are two RAM chips installed, repeat the above procedure for the second chip.
[* icon_caution] When reinstalling the logic board, be sure to install a new layer of thermal paste on the three processors. We have a [guide|744|guide] that makes it easy.