Skip to main content

#4 단계의 변경 사항

Adrian- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Remove the three screws holding the metal backing down
[* black] Push on the plastic piece near the top right of the metal backing and lift the metal backing up to release the top half
[* black] Push on the plastic piece near the top right of the metal backing and lift the metal backing up to release the top half
[* black] Pull the metal backing towards the bottom of the camera to free it from the lower right catch
[* black] lift the metal backing up and off of the camera