메인 콘텐츠로 스킵하기

#7 단계의 변경 사항

Zach- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] '''Remove the screw at the upper right corner.corner. (Picture 1)'''
[* black] '''Carefully work the ribbon circuit, pictured at the left side, back and forth to free it from the plastic retainer.retainer. (Picture 1)'''
[* black] '''Lift the black locking mechanism up (picturePicture 2) and gently pull the ribbon circuit to detach.'''
[* black] Upon completion of this step, the lower circuit board should be attached in one place and be freely hanging as shown in picture 2shown. (Picture 2)
[* black] '''Remove the screw at the upper right corner.corner. (Picture 1)'''
[* black] '''Carefully work the ribbon circuit, pictured at the left side, back and forth to free it from the plastic retainer.retainer. (Picture 1)'''
[* black] '''Lift the black locking mechanism up (picturePicture 2) and gently pull the ribbon circuit to detach.'''
[* black] Upon completion of this step, the lower circuit board should be attached in one place and be freely hanging as shown in picture 2shown. (Picture 2)