주요 콘텐츠로 건너뛰기

#2단계의 변경 사항

Robert Spencer Harrison- 에 의해 수정

편집 승인됨 완료자 Robert Spencer Harrison

이전
이후
변경 사항이 없습니다

단계 라인

-[* black] Slide the keyboard panel away from you.
+[* black] Slide the keyboard panel away from you to free it from the 4250s.
[* icon_caution] Do not yank the keyboard panel away from the 4520s. This may damage the cable.
-[* black] Gently raise up the keyboard 3 inches; a ribbon cable will be visible underneath.
-[* red] Disconnect the ribbon cable from the motherboard by carefully lifting the tab upwards one side at a time.
-[* black] The ribbon cable will now be loose. Lift the keyboard panel up and set it aside.
-[* icon_reminder] When reassembling, feed the ribbon cable into the port and and hold it in place. Press down on the tab connected to the port, pinching the cable into place.

이미지 1

이전 버전

새로운 버전

이미지 2

삭제됨

이미지 3

삭제됨