주요 콘텐츠로 건너뛰기

#5단계의 변경 사항

Andrew Bookholt- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

-[* black] Carefully lift the upper case about half of an inch and move it so that you can access the power and speaker cables.
+[* icon_note] The connectors at the ends of the following cables are attached very firmly to the sockets on the logic board. Pulling directly on the cable will either separate the cable from its connector or the socket from the logic board.
+[* black] Use the sharp end of a spudger to disconnect the speaker cable connector.

이미지 1

이전 이미지 없음

추가